Nikon F3 MD4

Retained the famous Nikon bayonet type lens mount. New way to activate the camera operation (Winding crank opened to stand by position is being substituted by shutter release button switches meter on when depressed halfway, auto off after remains on for 16 sec. Electro-magnetically controlled, horizontal travel titanium focal plane shutter. Aperture-priority automatic exposure control with manual setting Metering range EV1 to EV18, film speed settings: ASA 12 to 6400 Stepless shutter speeds from 8 sec to 1/2000 sec in auto; 16 settings in manual mode, X (1/80s for non dedicated flash); B and T settings also provided. Backup mechanical release lever if battery fails Shutter will fired at initial frames at 1/80 until reaches frame 1 TTL center-weighted in new formulation of 80/20 A new Silicon photo diode (SPD) that handles both ambient metering and TTL OTF during flash exposures, housed underneath the main mirror and reflect the partially (8%) penetrated light source by a secondary mirror LCD panels for exposure indications LCD illuminator for reading LCD panel in dim light Exposure memory lock, Exposure compensation via dial; +2EV to ÷2EV in 1/3 increments. Mirror lock up, Depth-of-field preview, Multiple exposure lever Maximum 1/80 second flash sync shutter speed 22 Interchangeable focusing screens, 5+3 Interchangeable viewfinders, 4 Interchangeable camera backs New High Speed 6 fps motor drive with full remote control operations User cancelable quartz-controlled self-timer Body dimensions: 148.5 x 96.5 x 65.5 mm; Body weight: approx. 715g